Settings
Profile selection from internal database
- 1. Select cladding type, element type, profile, color, coating, thickness in dialogue window. It is possible to set slope against or along profile in degrees or percents
- 2. “Accept” button sets all selected parameters for current profile
- 3. All parameters of current profile will be used for drawing of vertical or horizontal objects until new current profile will be selected
- 4. Repeatedly opened dialogue window shows all parameters of current profile.
Outline
Converts axis lines into dividing lines
- 1. Select facade contour by left button to set dividing lines
- 2. Select axial lines for converting into dividing lines and press [Enter]
Set group
Array
Extrim
Inserts vertical items
- 1. Select facade contour by left button (must be preformed as polygon or closed polyline)
- 2. Select alignment point by left button (for example corner of facade or window)
- 3. Instead of alignment point (pt 2) it is possible to press [Enter]. In this case alignment point will be set to left side of facade contour automatically
Inserts horizontal items
- 1. Select facade contour by left button (must be preformed as polygon or closed polyline)
- 2. Select alignment point by left button (for example corner of facade or window)
- 3. Instead of alignment point (pt 2) it is possible to press [Enter]. In this case alignment point will be set to bottom side of facade contour automatically
Vertical beam
Vertical beam
Vertical beam
Vertical beam
Horizontal beam
Horizontal beam
Horizontal beam
Horizontal beam
Freehand beam
Vertical joint
Horizontal joint
Joint by object
Freehand joint
Converts view to plane
- 1. Select object to get all profiles with equal slopes
- 2. Pick point for plane
Cuts openings
- 1. Select opening contour by left button (must be preformed as polygon or closed polyline)
- 2. Objects full width intersecting with opening contour will be divided automatically
Divides items by dividing lines or openings
- 1. Select opening contour or dividing line by left button
- 2. Select all objects you want to divide and press [Enter]
- 3. Objects intersecting with opening contour or dividing line will be divided automatically
- 4. This command designed for dividing of long items or dividing objects partially intersecting with opening contour or dividing line
Divides items by dividing lines or openings with gap
- 1. Select opening contour or dividing line by left button
- 2. Select all objects you want to divide and press [Enter]
- 3. Type gap value and press [Enter]
Adds supports
- 1. Select axis lines (must be created as polylines on layer “FS-axis”)
- 2. Type support width value and press [Enter]
Support 1: B/2+B/2
- 1. Select axis and press [Enter]
- 2. Select objects to divide by B/2+B/2 mode and press [Enter]
Support 2: continuous
- 1. Select objects to append and press [Enter]
Support 3: B/2+0.1L
- 1. Select axis
- 2. Select nearest axis to the right side to calculate distance
- 3. Select objects to divide by B/2+0.1L mode and press [Enter]
Support 4: 0.1L+B/2
- 1. Select axis
- 2. Select nearest axis to the left side to calculate distance
- 3. Select objects to divide by 0.1L+B/2 mode and press [Enter]
Support 5: 0.1L+0.1L
- 1. Select axis
- 2. Select nearest axis to the left side to calculate distance
- 3. Select nearest axis to the right side to calculate distance
- 4. Select objects to divide by 0.1L+0.1L mode and press [Enter]
Support 0.1L+0.2L
- 1. Select axis
- 2. Select nearest axis to the left side to calculate distance
- 3. Select nearest axis to the right side to calculate distance
- 4. Select objects to divide by 0.1L+0.2L mode and press [Enter]
Support 0.2L+0.1L
- 1. Select axis
- 2. Select nearest axis to the left side to calculate distance
- 3. Select nearest axis to the right side to calculate distance
- 4. Select objects to divide by 0.2L+0.1L mode and press [Enter]
Support A+B
Clear side overlap
- 1. Select objects to clear side overlap and press [Enter]
Side overlap 1/3
Side overlap 50%
- 1. Select objects to set side overlap 50% and press [Enter]
Side overlap 2/3
Side overlap 2x
- 1. Select objects to set side overlap 2x and press [Enter]
Side overlap 3x
- 1. Select objects to set side overlap 3x and press [Enter]
Panel overlap
Sets nonstandard RAL color
- 1. Select nonstandard RAL color in color table
- 2. Select destination objects to set new color and press [Enter]
Set nonstandard internal color
Set article
Sets Zn coating
- 1. Select destination objects to set Zn coating and press [Enter]
Sets other thickness
- 1. Select objects to set new thickness and press [Enter]
- 2. Type new thickness value and press [Enter]
Matches selected item properties
- 1. Select object by left button to set source properties
- 2. Select destination objects to match properties and press [Enter]
- 3. Command matches profile, thickness, length, color, coating and slopes.
Match item length
Round length
Changes length from the start of item
- 1. Start point is set to bottom side of vertical object and right side of horizontal object
- 2. Select objects to change length and press [Enter]
- 3. Type lengthening value or pick two points on screen and press [Enter]
- 4. If shortening is required, type negative value (keyboard option only)
Changes length from the end of item
- 1. End point is set to upper side of vertical object and left side of horizontal object
- 2. Select objects to change length and press [Enter]
- 3. Type lengthening value or pick two points on screen and press [Enter]
- 4. If shortening is required, type negative value (keyboard option only)
Performs numbering of all items in the drawing
- 1. Performs automatical numbering of all objects in the drawing
- 2. Attention: sorting and numbering requires time dependent on complexity of drawing and quantity of different objects and properties.
Shows information for selected item
- 1. Select object by left button to get information
- 2. If properties window moved, selected item will be highlighted
Shows and hides all labels
- 1. Dependent on drawing status shows and hides all labels
Move labels up
Move labels down
Shows and hides number labels
- 1. Dependent on drawing status shows and hides number labels
Show/hide item article
Shows and hides length labels
- 1. Dependent on drawing status shows and hides length labels
Shows and hides color labels
- 1. Dependent on drawing status shows and hides color labels
Shows and hides thickness
- 1. Dependent on drawing status shows and hides thickness labels
Shows and hides slope
Shows and hides side overlap
- 1. Dependent on drawing status shows and hides side overlap labels
Shows and hides construction line
- 1. Dependent on drawing status shows and hides construction line
Fill/hide filling
Add grouping line automatically
- 1. Select object to get all similar profiles
Add grouping line manually
- 1. Select object to get all similar profiles
- 2. Pick two points on screen for grouping line
Select
Select by thickness
Deletes all objects and tables
- 1. Deletes all objects and tables automatically
Inserts predefined A3 border
- 1. Pick area by two points on screen for drawing border
- 2. Border scale will be calculated automatically by selected area
- 3. Instead of selecting area it is possible to press [Enter]. In this case drawing border will be inserted in scale M1:100. Pick border insertion point on screen
Inserts predefined A4 border
- 1. Pick area by two points on screen for drawing border
- 2. Border scale will be calculated automatically by selected area
- 3. Instead of selecting area it is possible to press [Enter]. In this case drawing border will be inserted in scale M1:100. Pick border insertion point on screen
Inserts predefined A2 border
- 1. Pick area by two points on screen for drawing border
- 2. Border scale will be calculated automatically by selected area
- 3. Instead of selecting area it is possible to press [Enter]. In this case drawing border will be inserted in scale M1:100. Pick border insertion point on screen
Inserts predefined A1 border
- 1. Pick area by two points on screen for drawing border
- 2. Border scale will be calculated automatically by selected area
- 3. Instead of selecting area it is possible to press [Enter]. In this case drawing border will be inserted in scale M1:100. Pick border insertion point on screen
Inserts specification table
- 1. Pick table insertion point on screen
- 2. Write description for specification
- 3. Specification table will be created for all objects in drawing
- 4. Tip: insert A4 format drawing border in scale M1:100 before calling of specification command
Table by group
Inserts specification table by selection
- 1. Select objects for specification and press [Enter]
- 2. Pick table insertion point on screen
- 3. Write description for specification
- 4. Tip: insert A4 format drawing border in scale M1:100 before calling of specification command
Table by article
Table by coating and thickness
Inserts specification table by color
- 1. Select object for specification by color and press [Enter]
- 2. Pick table insertion point on screen
- 3. Write description for specification
- 4. Tip: insert A4 format drawing border in scale M1:100 before calling of specification command
Inserts specification table by thickness
- 1. Select object for specification by thickness and press [Enter]
- 2. Pick table insertion point on screen
- 3. Write description for specification
- 4. Tip: insert A4 format drawing border in scale M1:100 before calling of specification command
Table by coating and thickness
Total specification
Edit specification line
Table of profiles
Specification table exported to tab-delimited format file
- 1. Opens specifications in tab-delimited format file for importing into speadsheet
Table of profiles by selection
Table of profiles by color
Table of profiles by thickness
Table of beams
Table of beams by selection
Table of beams by thickness
Table of joints
Table of joints by selection
Table of joints by color
Project data
Inserts legend of profiles
- 1. Pick A4 border insertion point on screen
- 2. Command inserts legend for all used profiles in drawing
Inserts cladding label
- 1. Select object for label
- 2. Pick point on screen for text label
- 3. Text style and size depends on current dimension style settings
Menu
License
Release Notes
Update
Report
Help links
All product names, registered trademarks, trade names or company names mentioned at in-axis.com or in-axis.lt are used for identification only and are the property of their respective owners.